Project Overview
In this international environmental engineering project, Henan Hongke Heavy Machinery Co., Ltd. designed, manufactured, and commissioned a high-efficiency 200 TPD Activated Carbon Regeneration Rotary Kiln production line for a major industrial water-treatment and chemical recovery enterprise in Vietnam.
As manufacturing, municipal water purification, and food-and-beverage processing expand rapidly across Vietnam and Southeast Asia, industrial facilities generate massive volumes of spent granular and coconut-shell activated carbon. Disposing of spent carbon is costly and environmentally hazardous, whereas thermal reactivation restores adsorption capacity at a fraction of virgin carbon costs. Leveraging decades of specialized thermal engineering expertise, Henan Hongke Heavy Machinery Co., Ltd. delivered a complete, automated Activated Carbon Regeneration Rotary Kiln production line built around our precision-engineered Φ2.5×50m Activated Carbon Regeneration Rotary Kiln.
Technical Highlights & Equipment Specifications
The centerpiece of this facility is the Φ2.5×50m Activated Carbon Regeneration Rotary Kiln, integrated with an automated dewatering and feeding system, superheated steam injection manifolds, a water-cooled discharge cooler, and a multi-stage exhaust gas purification unit to form a turnkey Activated Carbon Regeneration Rotary Kiln production line.
| Parameter | Specification / Value |
| Project Location | Vietnam (Southeast Asia) |
| Core Equipment | Φ2.5×50m Activated Carbon Regeneration Rotary Kiln |
| Production Line Type | Complete Thermal Activated Carbon Regeneration Rotary Kiln production line |
| Production Capacity | 200 Tons/Day (approx. 8.5 Tons/Hour / 66,000 Tons/Year) |
| Feedstock Material | Spent Coconut-Shell & Coal-Based Granular Activated Carbon (GAC) |
| Reactivation Temperature | 800°C – 900°C (Controlled Steam-Atmosphere Activation Zone) |
| Kiln Inclination & Speed | 3.0% Inclination / Variable Frequency Drive (0.5 – 3.0 rpm) |
| Sealing & Atmosphere Control | Double-Layer Graphite-Flexible Labyrinth Seals (Oxygen content less than 1.5%) |
| Heating & Steam System | Multi-Zone Low-NOx Natural Gas Burners + Superheated Steam Injection |
| Recovered Carbon Quality | Iodine Value Recovery ≥ 93%–96% / Regeneration Burn-Off Loss ≤ 5% |
Key Challenges & Custom Engineering Solutions
1. Preventing Over-Oxidation & Minimizing Carbon Burn-Off Loss
Challenge: During high-temperature thermal reactivation (800°C–900°C), any air leakage into the kiln cylinder causes direct combustion of the carbon skeleton, resulting in excessive weight loss and weakened mechanical hardness.
Solution: Henan Hongke Heavy Machinery Co., Ltd. engineered the Φ2.5×50m Activated Carbon Regeneration Rotary Kiln with high-precision double-layer flexible graphite and labyrinth seals at both the feed and discharge ends. Combined with positive-pressure superheated steam injection and automated oxygen-content sensors, internal oxygen is strictly maintained below 1.5%—keeping regeneration burn-off loss under 5% while maximizing pore structure recovery.
2. Precise Multi-Zone Temperature Control for High Iodine Value Recovery
Challenge: Spent activated carbon entering the plant carries varying moisture levels (30%–45%) and complex adsorbed organic pollutants. Uneven heating leads to incomplete desorption or structural pore collapse.
Solution: Our engineers designed the Activated Carbon Regeneration Rotary Kiln production line with three distinct, PLC-monitored thermal zones inside the 50-meter cylinder: a low-temperature drying zone (150°C–250°C), a pyrolysis/volatilization zone (400°C–650°C), and a high-temperature steam reactivation zone (800°C–900°C). This staged thermal profile restores the iodine adsorption value to over 95% of virgin carbon performance.
3. Complete Destruction of Volatile Organic Compounds (VOCs) & Clean Exhaust
Challenge: Desorbing industrial organic contaminants produces hazardous VOCs and acidic gases that must be completely neutralized to meet Vietnam's strict industrial air emission regulations.
Solution: The Activated Carbon Regeneration Rotary Kiln production line integrates a secondary high-temperature combustion chamber (operating above 1,100°C with a residence time greater than 2 seconds) to fully oxidize all pyrolyzed VOCs, followed by a waste-heat boiler, rapid quench tower, alkaline spray scrubber, and pulse baghouse filter. Exhaust emissions remain well below local environmental limits, while recovered steam from the waste-heat boiler directly supplies the Activated Carbon Regeneration Rotary Kiln, cutting external fuel consumption by 25%.
Project Results & Customer Benefits
Superior Adsorption Recovery: Reactivated carbon discharged from the Φ2.5×50m Activated Carbon Regeneration Rotary Kiln consistently achieves an iodine value of 950–1,050 mg/g (95%+ recovery rate) and ball-pan hardness above 96%, allowing immediate reuse in high-grade industrial purification.
200 TPD Continuous High-Efficiency Output: Automated PLC/SCADA control and heavy-duty mechanical construction enable stable 200 tons per day operation with an annual uptime exceeding 330 days.
Rapid Return on Investment (ROI): By regenerating spent carbon at less than 30% of the cost of purchasing new activated carbon—and utilizing waste-heat steam recovery—the client achieved full capital payback within 14 months of commissioning.
Turnkey Activated Carbon Regeneration Rotary Kiln Production Line Solutions by Henan Hongke
From spent carbon laboratory reactivation testing and process flow engineering to heavy equipment fabrication, overseas shipping, on-site installation, and operator training, Henan Hongke Heavy Machinery Co., Ltd. delivers complete EPC Activated Carbon Regeneration Rotary Kiln production lines for environmental protection, water treatment, gold mining (CIL/CIP), and chemical industries worldwide. Whether you need a compact 20 TPD unit or a large-scale 200 TPD Φ2.5×50m Activated Carbon Regeneration Rotary Kiln, our engineering team provides proven reliability and end-to-end technical support.
Planning an activated carbon regeneration or manufacturing plant in Southeast Asia or worldwide? Contact Henan Hongke Heavy Machinery Co., Ltd. today to request a customized process flow diagram, equipment configuration list, and detailed technical proposal.
